Painting services

RARE PAINT APPLICATION PROCESS

NEW ROOFING APPLICATION

Surface Cleaning

  • Remove dust, moss, and grease adhering to the surface using a high-pressure washer combined with brushes and cleaning cloths to thoroughly clean the roof surface. Allow it to dry completely.

Apply one coat of anti-corrosion primer

  • Ensure the surface is clean and completely dry before painting.=
  • Apply RARE anti-corrosion primer with a standard dry film thickness of 30–60 µm

Apply the first topcoat layer

  • Allow 2–4 hours for the primer coat to fully dry

  • Use a paint sprayer to apply one even topcoat layer with a dry film thickness of 60–90 µm.

 

Apply the second topcoat layer

  • Once the first topcoat has dried (after15–20 minutes), proceed to apply the second topcoat according to technical specifications
  • Final dry film thickness: 150–240 µm

 

RUSTED METAL ROOF APPLICATION

STEP 1: CLEAN DUST AND DIRT WITH A HIGH-PRESSURE WASHER

STEP 2: REMOVE RUST BY A SPECIALIZED MACHINE

  • Use a rust-removing machine or a specialized grinder fitted with an appropriate grinding disc or wire brush to thoroughly remove rust, peeling paint, and contaminants.

STEP 3: SURFACE CLEANING

  • Use a brush to remove dust, metal particles, and contaminants after rust removal

  • Use a specialized blower to remove dust and water from gaps and joints, ensuring the surface is completely clean.

ROOF BEFORE CLEANING

ROOF AFTER CLEANING

STEP 4: INSPECT AND ASSESS THE SURFACE AFTER CLEANING

  • Check visually and by touch: no rust, metal particles, grease, or dirt remaining

  • If any area does not meet the requirements, it must be cleaned and treated again

  • Wait until the surface is completely dry before proceeding to the next step

STEP 5: BRUSH/SPRAY SURFACE TREATMENT AGENT

  • Mix the surface treatment agent at a ratio of A:B = 4:1 and stir well before use

  • Pot life of the mixture: within 4 hours after mixing.

  • Application: brush or spray a thin layer to ensure full coverage of the entire metal surface, including gaps and joints

  • Drying time: approximately 4 hours, and proceed with primer application on the same day.

STEP 6: PRIMER

  • Spray 1–2 coats of anti-corrosion primer depending on the    roof structure

  • Dry film thickness: approximately 60–80 µm

STEP 7: RARE TOPCOAT

  • Spray 2 coats of RARE topcoat according to technical standards.

  • Dry film thickness: approximately 130 – 150 µm.

APPLICATION ON WALLS AND CONCRETE